🔐 WB Repeater Grid – Category Rules (MASTER)

🔹 Hydraulic Cylinders

📊 Repeater Grid – Hydraulic Cylinders (LOCKED ORDER)

🏷️ Product Code:
⚖️ Capacity Ton:
🔄 Action Type: Single-Acting / Double-Acting
⚙️ Cylinder Type: (Low Height / General Purpose / etc.)
↕️ Stroke Length: in
⬇️ Collapsed Height: in

📌 Rule:
Collapsed Height is mandatory for Low Height & High Tonnage cylinders.

🔹 Hydraulic Jacks

📊 Repeater Grid – Hydraulic Jacks (LOCKED ORDER)

🏷️ Product Code:
⚖️ Capacity Ton:
🔧 Power Type: (Hydraulic / Mechanical)
⚙️ Jack Type: (Bottle / Toe / Rail / etc.)
⬆️ Extended Height: in
⬇️Collapsed Height: in

📌 Rule:
Both extended and collapsed height are always required.

🔹 Hydraulic Pumps

📊 Repeater Grid – Hydraulic Pumps (LOCKED ORDER)

🏷️ Product Code:
📊 Max Pressure: psi
⚡ Max Flow Rate:
🧪 Fluid Capacity:
🔄 Cylinder Compatibility: Single-Acting / Double-Acting
💨 Power Type: (Manual / Electric / Air / Gas)

📌 Rule:
Do not mix flow units between pumps (stay consistent site-wide).

🔹 Mechanical Jacks

📊 Repeater Grid – Mechanical Jacks (LOCKED ORDER)

🏷️ Product Code:
⚖️ Capacity Ton:
⚙️ Jack Type: (Screw / Rack & Pinion / Toe)
📏 Lift Range: in
⬇️ Collapsed Height: in
🛠️ Operation Type: Manual

📌 Rule:
No hydraulic data fields allowed.

🔹 Stressing Jacks

📊 Repeater Grid – Stressing Jacks (LOCKED ORDER)

🏷️Product Code:
⚖️ Capacity Ton:
↕️ Stroke Length: in
⚙️ Jack Type: Stressing
🔄 Cylinder Compatibility: Single-Acting
🎯 Typical Application: (Post-Tensioning / Cable Stressing)

📌 Rule:
Application field is mandatory (SEO + technical clarity).

🔹 Hydraulic Cutters

📊 Repeater Grid – Hydraulic Cutters (LOCKED ORDER)

🏷️ Product Code:
⚖️ Cutting Force: Ton
✂️ Cutting Capacity:
⚙️ Cutter Type: (Rebar / Cable / Chain)
💨 Power Source: Hydraulic
🏋️ Weight:

📌 Rule:
Cutting capacity must be stated clearly (diameter or material).

🔹 Hydraulic Spreaders

📊 Repeater Grid – Hydraulic Spreaders (LOCKED ORDER)

🏷️ Product Code:
⚖️ Spreading Force: Ton
↔️ Maximum Spread: in
⬇️ Collapsed Width: in
⚙️ Tool Type: Spreader
💨 Power Source: Hydraulic

📌 Rule:
Spread distance is mandatory — never omit.

🔹 Hydraulic Presses

📊 Repeater Grid – Hydraulic Presses (LOCKED ORDER)

🏷️ Product Code:
⚖️ Press Capacity: Ton
⚙️ Press Type: (Frame / H-Frame / C-Frame)
💨 Power Source: Hydraulic
↔️ Bed Width: in
🎯 Typical Use:

📌 Rule:
Press type must be declared for filtering.

🔹 Hydraulic Nut Splitters

📊 Repeater Grid – Hydraulic Nut Splitters (LOCKED ORDER)

🏷️ Product Code:
⚖️ Splitting Force: Ton
🔩 Nut Size Range:
⚙️ Tool Type: Nut Splitter
💨 Power Source: Hydraulic
🏋️ Weight:

📌 Rule:
Nut size range is mandatory (critical rental question).

🔹 Hydraulic Pullers

📊 Repeater Grid – Hydraulic Pullers (LOCKED ORDER)

🏷️Product Code:
⚖️ Pulling Force: Ton
⚙️ Puller Type: (2-Jaw / 3-Jaw / Cross Bearing)
📏 Reach: in
↔️ Spread: in
💨 Power Source: Hydraulic

📌 Rule:
Reach + spread must both be present.

🔹 Hydraulic Punches

📊 Repeater Grid – Hydraulic Punches (LOCKED ORDER)

🏷️ Product Code:
⚖️ Punching Force: Ton
🕳️ Punch Capacity:
⚙️ Tool Type: Hydraulic Punch
💨 Power Source: Hydraulic
🏋️Weight:

📌 Rule:
Punch capacity must reference material type.

🔹 Synchronous Lifting Systems

📊 Repeater Grid – Synchronous Lifting (LOCKED ORDER)

🏷️ Product Code:
⚖️ System Capacity: Ton
🔢 Number of Lift Points:
⚙️ Control Type: Synchronous
💨 Power Source: Hydraulic
🎯 Typical Application:

📌 Rule:
System capacity = total combined capacity, not per point.